Strong, durable, simple and reliable
|
|
|
|
| The screw conveyor enables a uniform layer of the material to be dried. | The rotating plate, whose speed can be regulated, exposes the material to the hot air flow and directs it towards the screw conveyor. | The gap of approximately 2m between the plates makes it easy to inspect and to perform maintenance inside the dryer. |
- ROTATION OF MATERIAL
Each drying plate is equipped with a screw conveyor which thoroughly rotates and mixes the material to be dried. This process provides more even and better quality drying. - ROTATION SYSTEM
Each rotating plate is driven by a gearmotor, which ensures a constant rotation speed with complete reliability. - PLATE COVERINGS
The rotating plates are covered with a highly resistant stainless steel perforated sheeting. The load loss of the material to be dried is lower than that of the covering, leading to better diffusion of the hot air flow across the whole surface. Moisture can be extracted gradually, without thermal shock. The more even humidity level is one of the main advantages of DRYER ONE™. The coverings can easily and quickly be replaced. - ROTATING METAL PLATES
The rotating plates have a stainless steel grated structure with a planarity much greater than that of conveyor belts. They have high resistance to load stress and corrosion. The grated structure is divided into segments of equal size, making it much easier to carry out maintenance work or replacements in the space of just a few minutes.
